Looking for:
USB Charging Data Cable Compatible with Zoom H5 Handy Recorder Handy Recorder | eBay – The H5. Versatile Productivity. Click here to ENTER
Are you struggling with the overdub feature of the Zoom H5? You definitely CAN overdub tracks while listening to your previously recorded tracks with the H5, but the procedure to do it involves a lot of steps.
It does get easy once you get the hang of it! Thinking about getting a Zoom H5? Do you like the Zoom H5, but need something a little more portable? Read my Zoom H2n Review! In this guide, I will go over what I would consider to be the most common use-case of the overdub feature, but of course this same procedure can be used for other forms of overdubbing.
Slight variations of this use-case may be that instead of recording from the X-Y mic capsule, you would like to record from either Channel 1 or Channel 2, or both. This is also possible. So, for example, the most channels that you can record to at the same time, while listening to a previously recorded track, is three, as long as the track you are listening to has been mixed down to a single channel, and is played through either Ch1 or Ch2.
In order to use the overdub feature, you must be in Multi-File mode as opposed to Stereo mode. To get change modes, press the Menu button. Next, active the X-Y microphone module to get it ready for recording. To do this, press either the L or R button. When you do so, the red indicator light will illuminate above both the L and R buttons. Next, record the base track as you normally would by pressing the record button, playing the music, then pressing the record button again to stop the recording.
Overdub mode means that you can listen to the base track while recording another track. To put the H5 into Overdub mode, press Menu and select Project. Press Enter.
Next, select the Last Project which is the base track that you just recorded In this example, it is , but yours may be something like Zoom, for example, depending on which naming convention your H5 is set to. If you want to overdub using a channel other than the X-Y microphone channels, for example channel 1 or channel 2, you can go ahead and do that now by pressing the 1 or 2 channel button until it turns red.
Then press Record. You can monitor the base track using the internal speaker or headphones recommended. In order to do that, we must first select these channels. Use the toggle switch to navigate the brackets to Select, and press Enter.
Next, we will link Channels 1 and 2 as a Stereo pair. WAV your project name may be different. Then press Enter. Press the Record button to record the 2nd track. You will probably want to monitor the base track by using headphones, otherwise the X-Y microphone will pick up the base track as it plays through the speaker on the back of the H5.
Once you are done recording, press the Record button again to stop recording. At this point, you can either be done skip to step 19 , or record another track over the base track. To do this, continue to step You will actually have 2 different files that begin at exactly the same time.
You are not actually adding tracks together. That would be the Mix Down step, which we are not doing here. In the next step we will record another track while monitoring the Base Track. It will NOT record over the first overdub, rather it will create an additional file that is synced with the first 2.
As well as 2 additional files. All 3 recordings begin at the same time. Repeat Steps to record as many tracks as you want. Each time you record a new track, you will be monitoring the Base Track. You will not hear any of the other recordings while recording subsequent tracks.
To Exit the overdubbing, press the Menu button 5 times. You are now ready to record normally in a new Project. When you export your files to your computer, you will see a list of files in the Project. The first one corresponds to the Base Track, and the subsequent recordings all begin at the same time and are all of the additional tracks that you recorded. Thanks for reading, and I hope this was helpful to someone!
If this helped you, let me know in the comments! I switched from old tascam dr40 to zoom h5 and I have to say, this is incredibly complicated.
In addition, my usual workflow is to overdub on mixed files, so I can hear all other instrument lines in one track. It seems possible, using mix down function, but way way more complicated and slow.. If anyone is reading this- if this is a main purpose of your recording device, I recommend Tascam.. Thanks for the comment, for this sort of purpose, it does seem overly complicated! That being said, I did find I got a bit quicker the more I did it. Good to hear a comparison with the DR40!
Really great! Thank you. There are uTube videos explaining overdubbing per se but yours enlightened me to using the inbuilt capsules throughout. You are commenting using your WordPress. You are commenting using your Twitter account. You are commenting using your Facebook account. Notify me of new comments via email. Notify me of new posts via email.
How to Make Maple Syrup! Search for: Search. Overview In this guide, I will go over what I would consider to be the most common use-case of the overdub feature, but of course this same procedure can be used for other forms of overdubbing. You turn on the H5, set the gain, and record a base track of a song using the X-Y Stereo capsule.
This base track includes all or at least the key parts of the final song. It may also include a time-keeping click. While listening to the base track with monitoring headphones, you record a single track again using the X-Y Stereo mics, for example the rhythm guitar part. Next, while listening to the base track with monitoring headphones, you record another single track with the X-Y Stereo mics, for example the vocal track. You continue on in this way recording the rest of the individual tracks, such as percussion, lead guitar, keyboard, etc… When you are finished recording all of the parts, you copy all of the individual WAV files from the H5 into your DAW for processing and mixing.
Step by Step Instructions Turn on the Zoom H5 by sliding the power switch down and holding for several seconds. Press the L or R button both L and R indicator lights will turn red, if not, press again until red.
Press Menu. Press the 1 and 2 buttons simultaneously to combine them. Press the Record button to record the 2nd track, press Record again to stop recording.
Press the Record button to record the 3rd track, press Record again to stop recording. Navigate down to Rec Mode and press Enter. Then select MultiFile and press Enter. If you want to overdub using the same X-Y microphones, continue on to the next step. To combine Channels 1 and 2, press the 1 and 2 buttons simultaneously and release.
At this point, you are done. You have recorded a second track over the first Base Track. To record a 4th track, continue to step If you do want to combine tracks, press the Select button and choose Mix Down. And Where to get it? Leave a Reply Cancel reply Enter your comment here Fill in your details below or click an icon to log in:. Email Address never made public. Follow Following.
Practical Mechanic Join 84 other followers. Sign me up. Already have a WordPress. Log in now. Loading Comments Email Name Website.